A chemically resistant High-build epoxy resin coating
• Good chemical resistance
• Good resistance to foot and forklift traffic
• Easy to keep clean
• Easy to apply
Preparation Ensure floor is clean, dry and clear of any debris. If the floor already has an existing coating, be sure that it is well bonded and clear of any contamination. If the substrate is new i.e. new concrete, ensure it is at least 4 weeks old. We would also recommend a light disc grind to a new concrete surface, to create a key for the paint to bond to.
Mixing Empty the contents of the smaller tin into the larger tin and mix thoroughly. Please ensure the product is used immediately after completion of mixing.
Application Poor contents into a scuttle and begin to apply to the desired area with a 12 inch medium pile roller and a brush (Brush is only required for cutting in i.e. along the edge of floor at walls and round immovable objects) 2 coats is recommended.
All coverage rates for coatings are subject to the following: Surfaces must be smooth, clean and clear of debris. If painting on to an existing coating ensure it is well bonded and has been appropriately prepared before the application of a new coating. Application to be carried out immediately after the completion of mixing as pot life of product is limited. Temperature must be at a sensible level. For optimum coverage rates all coating products application must be carried out between 5 degrees centigrade and 25 degrees centigrade (excluding ZenRite Coat Cold which can be applied down to 0 degrees centigrade).
All coverage rates for screeds are subject to the following: The surface must be clean, appropriately prepared and clear of debris. Temperature must be at a sensible level. Application to be carried out immediately after the completion of mixing as pot life of product is limited.
We recommend all mixing to be carried out with a slow speed electric mixer. Mixing paddles are available from ZenRite.
Delivery on standard coloured products, workwear and accessories is 2-3 days. If this delivery time cannot be fulfilled due to stock levels or if a bespoke or non-standard colour has been requested you will be notified by email with expected delivery times.
You may also be interested in the following product(s)